DFM Digital Mass Flow Meter
-
Multi Parameter flow meters provide accurate data on three different fluid parameters
-
Totalizer
-
Alarm
-
Multi-Gas Calibration -storing primary calibration
-
data for up to 10 gases.
-
Flow Range: 10mL/min to 100mL/min
XFM Digital Mass Flow Meter
1. XFM Digital Mass Flow Meter
Design Features
-
Supports up to 23 Engineering Units (including User Defined).
-
Stores calibration data for up to 10 gases.
-
Programmable Totalizer indicates total gas quantity.
-
High and low gas flow Alarm limits with preset delay interval.
-
Two sets of user-programmable electromechanical SPDT relays with latch option.
-
User-selectable analog 0-5 Vdc or 4-20mA outputs.
DPC Digital Multi Gas Mass Flow Controller.
• Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature.
• Multi-Gas functionality: support for 90 different gases and gas mixes.
• “User Defi ned Mixture” functionality allows to create and store up
20 custom gas mixes with up to 5 different gases each.
• Quick (100-150 ms) response time.
• Flow Range: 0.5 mL/min to 1000L/min
• Standard accuracy ± (0.5[%] RD+0.2[%]] FS)
• 200 to 1 turn-down ratio.
• Two programmable mass flow rate totalizers.
• 0-5Vdc, 0-10Vdc, 4-20mA.
• RS-232/ RS-485).
• Programmable set point table with ramping up/down capability up to 16 steps.
DPM Digital Multi Gas Mass Flow Meter
-
Multi-Parameter functionality: Mass Flow, Volumetric Flow, Gas Pressure and Temperature.
-
Multi-Gas functionality: support for 90 different gases and gas mixes.
-
“User Defi ned Mixture” functionality allows to create and store up 20 custom gas mixes with up to 5 different gases each.
-
Quick (< 20ms) response time.
-
Standard accuracy ± (0.5[[][[]][[][%]]] RD + 0.2[[][[]][[][%]]] FS).
-
200 to 1 turndown ratio.
-
All 3 user selectable analog output interfaces are standard: 0-5Vdc, 0-10Vdc, 4-20mA.
-
Two user selectable digital communication interfaces (RS-232 and RS-485) are standard.
DFM Digital Mass Flow Meter
-
Multi Parameter flow meters provide accurate data on three different fluid parameters
-
Totalizer
-
Alarm
-
Multi-Gas Calibration -storing primary calibration
-
data for up to 10 gases.
-
Flow Range: 10mL/min to 100mL/min
XFM Digital Mass Flow Meter
· Supports up to 23 Engineering Units (including User Defined).
· Stores calibration data for up to 10 gases.
· Programmable Totalizer indicates total gas quantity.
· High and low gas flow Alarm limits with preset delay interval.
· Two sets of user-programmable electromechanical SPDT relays with latch option.
. User-selectable analog 0-5 Vdc or 4-20mA outputs
DFM Digital Mass Flow Meter
-
Multi Parameter flow meters provide accurate data on three different fluid parameters
-
Totalizer
-
Alarm, Multi-Gas Calibration -storing primary calibration
-
data for up to 10 gases.
-
Flow Range: 10mL/min to 100mL/min
XFM Digital Mass Flow Meter
1. XFM Digital Mass Flow Meter
Design Features
-
Supports up to 23 Engineering Units (including User Defined).
-
Stores calibration data for up to 10 gases.
-
Programmable Totalizer indicates total gas quantity.
-
High and low gas flow Alarm limits with preset delay interval.
-
Two sets of user-programmable electromechanical SPDT relays with latch option.
-
User-selectable analog 0-5 Vdc or 4-20mA outputs.
DPC Digital Multi Gas Mass Flow Controller.
• Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature.
• Multi-Gas functionality: support for 90 different gases and gas mixes.
• “User Defi ned Mixture” functionality allows to create and store up
20 custom gas mixes with up to 5 different gases each.
• Quick (100-150 ms) response time.
• Flow Range: 0.5 mL/min to 1000L/min
• Standard accuracy ± (0.5[%] RD+0.2[%]] FS)
• 200 to 1 turn-down ratio.
• Two programmable mass flow rate totalizers.
• 0-5Vdc, 0-10Vdc, 4-20mA.
• RS-232/ RS-485).
• Programmable set point table with ramping up/down capability up to 16 steps.
DPM Digital Multi Gas Mass Flow Meter
-
Multi-Parameter functionality: Mass Flow, Volumetric Flow, Gas Pressure and Temperature.
-
Multi-Gas functionality: support for 90 different gases and gas mixes.
-
“User Defi ned Mixture” functionality allows to create and store up 20 custom gas mixes with up to 5 different gases each.
-
Quick (< 20ms) response time.
-
Standard accuracy ± (0.5[[][[]][[][%]]] RD + 0.2[[][[]][[][%]]] FS).
-
200 to 1 turndown ratio.
-
All 3 user selectable analog output interfaces are standard: 0-5Vdc, 0-10Vdc, 4-20mA.
-
Two user selectable digital communication interfaces (RS-232 and RS-485) are standard.
XFM Digital Mass Flow Meter
· Supports up to 23 Engineering Units (including User Defined).
· Stores calibration data for up to 10 gases.
· Programmable Totalizer indicates total gas quantity.
· High and low gas flow Alarm limits with preset delay interval.
· Two sets of user-programmable electromechanical SPDT relays with latch option.
. User-selectable analog 0-5 Vdc or 4-20mA outputs
DFM Digital Mass Flow Meter
-
Multi Parameter flow meters provide accurate data on three different fluid parameters
-
Totalizer
-
Alarm, Multi-Gas Calibration -storing primary calibration
-
data for up to 10 gases.
-
Flow Range: 10mL/min to 100mL/min