About Education & Research Defense & Aerospace Manufacturing and Industrial CareerContact us
Introduction
Aalborg MFC Introduction
Aalborg Mass Flow Meters
Aalborg Mass Flow Controllers
Pressure Transducer
Pressure Transmitters

DFM Digital Mass Flow Meter

 
  • Multi Parameter flow meters provide accurate data on three different fluid parameters  
  • Totalizer
  • Alarm
  • Multi-Gas Calibration -storing primary calibration
  • data for up to 10 gases.
  • Flow Range: 10mL/min to 100mL/min
 

XFM Digital Mass Flow Meter

 
1. XFM Digital Mass Flow Meter 
 
Design Features
  • Supports up to 23 Engineering Units (including User Defined).
  • Stores calibration data for up to 10 gases.
  • Programmable Totalizer indicates total gas quantity.
  • High and low gas flow Alarm limits with preset delay interval.
  • Two sets of user-programmable electromechanical SPDT relays with latch option.
  • User-selectable analog 0-5 Vdc or 4-20mA outputs.

DPC Digital Multi Gas Mass Flow Controller.

 
• Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature.
• Multi-Gas functionality: support for 90 different gases and gas mixes.
• “User Defi ned Mixture” functionality allows to create and store up 
  20 custom gas mixes with up to 5 different gases each.
• Quick (100-150 ms) response time.
• Flow Range: 0.5 mL/min to 1000L/min 
• Standard accuracy ± (0.5[%] RD+0.2[%]] FS)
• 200 to 1 turn-down ratio.
• Two programmable mass flow rate totalizers.
• 0-5Vdc, 0-10Vdc, 4-20mA.
• RS-232/ RS-485).
• Programmable set point table with ramping up/down capability up to 16 steps.
 
 
 

DPM Digital Multi Gas Mass Flow Meter

 
  • Multi-Parameter functionality: Mass Flow, Volumetric Flow, Gas Pressure and Temperature.
  • Multi-Gas functionality: support for 90 different gases and gas mixes.
  • “User Defi ned Mixture” functionality allows to create and store up 20 custom gas mixes with up to 5 different gases each.
  • Quick (< 20ms) response time.
  • Standard accuracy ± (0.5[[][[]][[][%]]] RD + 0.2[[][[]][[][%]]] FS).
  • 200 to 1 turndown ratio.
  • All 3 user selectable analog output interfaces are standard: 0-5Vdc, 0-10Vdc, 4-20mA.
  • Two user selectable digital communication interfaces (RS-232 and RS-485) are standard.

DFM Digital Mass Flow Meter

 
  • Multi Parameter flow meters provide accurate data on three different fluid parameters  
  • Totalizer
  • Alarm
  • Multi-Gas Calibration -storing primary calibration
  • data for up to 10 gases.
  • Flow Range: 10mL/min to 100mL/min
 

XFM Digital Mass Flow Meter

 
· Supports up to 23 Engineering Units (including User Defined).
· Stores calibration data for up to 10 gases.
· Programmable Totalizer indicates total gas quantity.
· High and low gas flow Alarm limits with preset delay interval.
· Two sets of user-programmable electromechanical SPDT relays with latch option.
. User-selectable analog 0-5 Vdc or 4-20mA outputs

DFM Digital Mass Flow Meter

  • Multi Parameter flow meters provide accurate data on three different fluid parameters
  • Totalizer
  • Alarm, Multi-Gas Calibration -storing primary calibration
  • data for up to 10 gases.
  • Flow Range: 10mL/min to 100mL/min
 

XFM Digital Mass Flow Meter

 
1. XFM Digital Mass Flow Meter 
 
Design Features
  • Supports up to 23 Engineering Units (including User Defined).
  • Stores calibration data for up to 10 gases.
  • Programmable Totalizer indicates total gas quantity.
  • High and low gas flow Alarm limits with preset delay interval.
  • Two sets of user-programmable electromechanical SPDT relays with latch option.
  • User-selectable analog 0-5 Vdc or 4-20mA outputs.

DPC Digital Multi Gas Mass Flow Controller.

 
• Simultaneously displays Mass Flow, Volumetric Flow, Pressure and Temperature.
• Multi-Gas functionality: support for 90 different gases and gas mixes.
• “User Defi ned Mixture” functionality allows to create and store up 
  20 custom gas mixes with up to 5 different gases each.
• Quick (100-150 ms) response time.
• Flow Range: 0.5 mL/min to 1000L/min 
• Standard accuracy ± (0.5[%] RD+0.2[%]] FS)
• 200 to 1 turn-down ratio.
• Two programmable mass flow rate totalizers.
• 0-5Vdc, 0-10Vdc, 4-20mA.
• RS-232/ RS-485).
• Programmable set point table with ramping up/down capability up to 16 steps.
 
 
 

DPM Digital Multi Gas Mass Flow Meter

 
  • Multi-Parameter functionality: Mass Flow, Volumetric Flow, Gas Pressure and Temperature.
  • Multi-Gas functionality: support for 90 different gases and gas mixes.
  • “User Defi ned Mixture” functionality allows to create and store up 20 custom gas mixes with up to 5 different gases each.
  • Quick (< 20ms) response time.
  • Standard accuracy ± (0.5[[][[]][[][%]]] RD + 0.2[[][[]][[][%]]] FS).
  • 200 to 1 turndown ratio.
  • All 3 user selectable analog output interfaces are standard: 0-5Vdc, 0-10Vdc, 4-20mA.
  • Two user selectable digital communication interfaces (RS-232 and RS-485) are standard.

XFM Digital Mass Flow Meter

 
· Supports up to 23 Engineering Units (including User Defined).
· Stores calibration data for up to 10 gases.
· Programmable Totalizer indicates total gas quantity.
· High and low gas flow Alarm limits with preset delay interval.
· Two sets of user-programmable electromechanical SPDT relays with latch option.
. User-selectable analog 0-5 Vdc or 4-20mA outputs

DFM Digital Mass Flow Meter

  • Multi Parameter flow meters provide accurate data on three different fluid parameters
  • Totalizer
  • Alarm, Multi-Gas Calibration -storing primary calibration
  • data for up to 10 gases.
  • Flow Range: 10mL/min to 100mL/min
 
© Copyright Aeronic. All Rights Reserved. Designed by webbuild.